Campuses:
This is archival data. This system was retired as of August 21, 2023 and the information on this page has not been updated since then. For current information, visit catalogs.umn.edu.
Twin Cities Campus
Civil Engineering M.C.E.CSENG Civil, Envrn & Geo-Eng (CEGE)
College of Science and Engineering
Link to a list of faculty for this program.
Contact Information
Department of Civil, Environmental, and Geo-Engineering, University of Minnesota, 122 Civil Engineering Building, 500 Pillsbury Drive S.E., Minneapolis, MN 55455 (612-625-5522; fax: 612-626-7750)
Email:
cegesps@umn.edu
Website: http://www.cege.umn.edu
Along with the program-specific requirements listed below, please read the
General Information section of
this
website for requirements that apply to all major fields.
Civil engineering emphases are available in environmental engineering (e.g., pollutant fate and transport, process modeling, soil and groundwater remediation, water and wastewater treatment), geomechanics (e.g., fracture and localization, groundwater flow, stability and liquefaction, wave and shock propagation), structural engineering (e.g., computational and structural mechanics, earthquake engineering, infrastructure performance and durability, new systems and materials), transportation engineering (e.g., intelligent transportation systems, pavement design and materials, transportation economics, traffic safety), and water resources engineering (e.g., earthscape processes, environmental and biological systems, hydrologic and climate dynamics, hydrodynamics, and turbulence).
The master of civil engineering (M.C.E.) degree is designed for the practicing engineer who would like to obtain an advanced degree on a part-time or full-time basis. Students who intend to proceed to the Ph.D. program or who think they may later wish to be admitted to the Ph.D. program should apply for the master of science program. Students are expected to follow a coherent program of coursework in one of the following subareas of civil engineering: environmental, geomechanics, structural, transportation, or water resources engineering. The program is selected with the help of a faculty adviser and approved by the director of graduate studies. In addition to completing graduate-level courses, students must demonstrate professional competence either by carrying out and defending a design project or by taking a coursework-related final oral exam (without a project).
The degree typically takes 2-3 semesters (12-18 months) to complete on a full-time basis or 6-8 semesters on a part-time basis.
Program Delivery
Prerequisites for Admission
The preferred undergraduate GPA for admittance to the program
is 3.00.
An ABET-accredited, four-year bachelor's degree in engineering is required for admission.
Other requirements to be completed before admission:
The application deadlines are December 3 for fall admission and August 31 for spring admission. All materials must be submitted to the online application. Additional information is available at http://www.cege.umn.edu/prospective/graduate/how-to-apply.html
Applicants must submit their test score(s) from the following:
International applicants must submit score(s) from one of the following tests:
Key to test
abbreviations
(GRE, TOEFL, IELTS, MELAB).
For an online application or for more information about graduate education admissions, see the
General Information section of this
website.
Program Requirements
Plan A: Plan A requires
20
major credits,
up to
credits outside the major,
and
10
thesis credits.
The final exam is oral.
Plan C: Plan C requires
30
major credits and
up to
credits outside the
major.
There is no final exam.
This program may be completed with a minor.
Use of 4xxx courses toward program requirements is permitted under certain conditions with adviser approval.
A minimum GPA of 3.00
is required for students to remain in good standing.
The M.C.E. degree requires 30 credits and is offered under two plans. Plan A requires preparation of a thesis/design project. The thesis/design project must be carried out by the student in consultation with a faculty adviser. Plan C is a coursework-only degree program.
Required Courses
Any courses at the 5xxx and 8xxx level from the following programs may be used: AEM, AST, BBE, BMEN, CEGE, CHEM, CHEN, CSCI, EE, ESCI, IE, MATH, MATS, ME, PHYS, STAT. Use of 4xxx level courses must be approved by the Director of Graduate Studies and a maximum of 8 credits may be included. The following 4xxx courses may not be used: CEGE 4301, 4401, 4501, 4502, and 4522. Six credits in a minor may be included in the course credit total.
Plan A
Plan A requires a minimum of 20 course credits and 10 thesis credits for the design project.
CEGE 8777 - Thesis Credits: Master's
(1.0-18.0 cr)
Plan C
Plan C requires a minimum of 30 credits of coursework chosen in consultation with adviser.
|
|
Credits: | 1.0 [max 3.0] |
Grading Basis: | S-N or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 1.0 [max 2.0] |
Course Equivalencies: | CE 8300/GeoE 8300 |
Grading Basis: | S-N or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 1.0 [max 3.0] |
Grading Basis: | S-N or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 1.0 [max 3.0] |
Grading Basis: | S-N or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 1.0 -18.0 [max 50.0] |
Prerequisites: | Max 18 cr per semester or summer; 10 cr total required [Plan A only] |
Grading Basis: | No Grade |
Typically offered: | Every Fall, Spring & Summer |