Campuses:
This is archival data. This system was retired as of August 21, 2023 and the information on this page has not been updated since then. For current information, visit catalogs.umn.edu.
Twin Cities Campus
Mechanical Engineering B.M.E.Mechanical Engineering
College of Science and Engineering
The Department of Mechanical Engineering is committed to offering undergraduate and graduate education of the highest quality in mechanical engineering, to conducting significant basic and applied research in selected areas, and to providing professional service to the appropriate constituencies of a major land grant university.
Mechanical engineering is involved in most technological activities of society and dominates many, including automotive, transportation, materials handling, environmental and pollution control systems, refrigeration and cryogenics, power systems design, automation, system dynamics and control, computer-aided design and manufacturing, capital equipment design, and consumer products production. A mechanical engineer may be engaged in design, development, research, testing, manufacturing, administration, marketing, consulting, or education.
Program Delivery
This program is available:
Admission Requirements
Students must complete
8 courses
before admission to the program.
Freshman and transfer students are usually admitted to pre-major status
before admission to this major.
For information about University of Minnesota admission requirements, visit the
Office of Admissions
website.
Required prerequisites
Mathematics
Honors math (MATH 1571H, 1572H, 2573H, 2574H) may be taken in place of the listed courses.
Required prerequisites
Physical Sciences
CHEM 1061 - Chemical Principles I
[PHYS]
(3.0 cr)
or
CHEM 1071H - Honors Chemistry I
[PHYS]
(3.0 cr)
CHEM 1065 - Chemical Principles I Laboratory
[PHYS]
(1.0 cr)
or
CHEM 1075H - Honors Chemistry I Laboratory
[PHYS]
(1.0 cr)
PHYS 1301W - Introductory Physics for Science and Engineering I
[PHYS, WI]
(4.0 cr)
or
PHYS 1401V - Honors Physics I
[PHYS, WI]
(4.0 cr)
PHYS 1302W - Introductory Physics for Science and Engineering II
[PHYS, WI]
(4.0 cr)
or
PHYS 1402V - Honors Physics II
[PHYS, WI]
(4.0 cr)
Required prerequisites
Statics and Dynamics
AEM 2021 - Statics and Dynamics
(4.0 cr)
Required prerequisites
General Requirements
All students in baccalaureate degree programs are required to complete general University and college requirements including writing and liberal education courses. For more information about University-wide requirements, see the
liberal education requirements.
Required courses for the major, minor or certificate in which a student receives a D grade (with or without plus or minus) do not count toward the major, minor or certificate (including transfer courses).
Program Requirements
Major Courses
CSCI 1113 - Introduction to C/C++ Programming for Scientists and Engineers
(4.0 cr)
MATS 2002 - Introduction to the Science of Engineering Materials Laboratory
(1.0 cr)
AEM 3031 - Deformable Body Mechanics
(3.0 cr)
EE 3005 - Fundamentals of Electrical Engineering
(4.0 cr)
EE 3006 - Fundamentals of Electrical Engineering Laboratory
(1.0 cr)
IE 3521 - Statistics, Quality, and Reliability
(4.0 cr)
ME 2011 - Introduction to Engineering
(4.0 cr)
ME 3221 - Fundamentals of Design & Manufacturing
(4.0 cr)
ME 3222 - Mechanisms & Machine Design
(4.0 cr)
ME 3281 - System Dynamics and Control
(4.0 cr)
ME 3331 - Thermodynamics
(3.0 cr)
ME 3332 - Fluid Mechanics
(3.0 cr)
ME 3333 - Heat Transfer
(3.0 cr)
ME 4031W - Basic Mechanical Measurements Laboratory
[WI]
(4.0 cr)
ME 4054W - Design Projects
[WI]
(4.0 cr)
Technical Electives
Complete 15 credits of upper division technical electives, with at least 8 credits in ME. Students may choose options in power and propulsion, design and manufacturing, thermodynamics and heat transfer, environment, or select electives in consultation with their adviser.
Take 15 or more credit(s) from the following:
Environmental
Take 0 or more credit(s) from the following:
·
ME 5101 - Vapor Power Cycles
(4.0 cr)
·
ME 5103 - Thermal Environmental Engineering
(4.0 cr)
·
ME 5105 {Inactive}
(4.0 cr)
·
ME 5113 - Aerosol/Particle Engineering
(4.0 cr)
·
ME 5116 {Inactive}
(4.0 cr)
·
ME 5133 - Aerosol Measurement Laboratory
(4.0 cr)
·
ME 5312 - Solar Thermal Technologies
(4.0 cr)
·
Design & Manufacturing
Take 0 or more credit(s) from the following:
·
ME 5221 - Computer-Assisted Product Realization
(4.0 cr)
·
ME 5223 - Materials in Design
(4.0 cr)
·
ME 5228 - Introduction to Finite Element Modeling, Analysis, and Design
(4.0 cr)
·
ME 5241 - Computer-Aided Engineering
(4.0 cr)
·
ME 5243 - Advanced Mechanism Design
(4.0 cr)
·
ME 5247 - Applied Stress Analysis
(4.0 cr)
·
ME 5248 - Vibration Engineering
(4.0 cr)
·
ME 5281 - Feedback Control Systems
(4.0 cr)
·
ME 5286 - Robotics
(4.0 cr)
·
Thermal Sciences
(Power & Propulsion, Thermodynamics, Heat Transfer, Fluid Mechanics)
Take 0 or more credit(s) from the following:
·
ME 5101 - Vapor Power Cycles
(4.0 cr)
·
ME 5312 - Solar Thermal Technologies
(4.0 cr)
·
ME 5332 - Intermediate Fluid Mechanics
(4.0 cr)
·
ME 5341 - Case Studies in Thermal Engineering and Design
(4.0 cr)
·
ME 5344 - Thermodynamics of Fluid Flow With Applications
(4.0 cr)
·
ME 5351 - Computational Heat Transfer
(4.0 cr)
·
ME 5446 - Introduction to Combustion
(4.0 cr)
·
ME 5461 - Internal Combustion Engines
(4.0 cr)
·
ME 5462 - Gas Turbines
(4.0 cr)
·
ME 5465 {Inactive}
(4.0 cr)
·
ME 5666 - Modern Thermodynamics
(4.0 cr)
Upper Division Writing Intensive within the major
Students are required to take one upper division writing intensive course within the major. If that requirement has not been satisfied within the core major requirements, students must choose one course from the following list. Some of these courses may also fulfill other major requirements.
Take 0 - 1 course(s) from the following:
·
ME 4031W - Basic Mechanical Measurements Laboratory
[WI]
(4.0 cr)
·
ME 4043W - Industrial Assignment II
[WI]
(4.0 cr)
·
ME 4054W - Design Projects
[WI]
(4.0 cr)
·
ME 4131W - Indoor Environment & Energy Laboratory
[WI]
(4.0 cr)
·
ME 4431W - Energy Conversion Systems Laboratory
[WI]
(4.0 cr)
Program Sub-plans
A sub-plan is not required for this program.
EIP
ME EIP program (engineering intern program or co-op program) is available during the last two years of study. Upper division status and a satisfactory GPA are required for admission. The co-op program provides applied engineering training in selected established industries during semesters of supervised assignments that alternate with semesters of University studies.
Students in the ME EIP program (engineering intern program or co-op program) register for three industrial assignment courses. ME 3041 (2 credits), ME 4043W (4 credits), and ME 4044 (2 credits) for a total of 8 credits. These courses count toward the technical elective credit requirement.
Students register for industrial assignments as they would for regular classes. Requirements for the course include writing a summary of an article in a technical journal, attending a workshop (ME 3041, ME 4043W), submitting a report draft, and writing a final report. The course grade is based on writing; work performance cannot be considered in assigning a grade. The second industrial assignment, ME 4043W, is oriented toward solving a design problem and fulfills a 4-credit intensive writing course requirement. Cooperation from company personnel is required in accomplishing most reports, particularly the ME 4043W reports.
Internship
ME 3041 - Industrial Assignment I (2.0 cr)
ME 4043W - Industrial Assignment II [WI] (4.0 cr)
ME 4044 - Industrial Assignment III (2.0 cr)
|
|
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 1271/Math 1381/Math 1571/ |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 1271/Math 1381/Math 1571/ |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 1272/Math 1282/Math 1372/ |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 1272/Math 1282/Math 1372/ |
Typically offered: | Every Spring |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 2263/Math 2374/Math 2573H |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 2263/Math 2374/Math 2573H |
Typically offered: | Every Fall & Spring |
Credits: | 3.0 [max 3.0] |
Course Equivalencies: | Chem 1061/ 1071/H/ 1081 |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Course Equivalencies: | Chem 1061/ 1071/H/ 1081 |
Grading Basis: | A-F only |
Typically offered: | Every Fall |
Credits: | 1.0 [max 1.0] |
Course Equivalencies: | Chem 1065/Chem 1075H |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 1.0 [max 1.0] |
Course Equivalencies: | Chem 1065/Chem 1075H |
Grading Basis: | A-F only |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Phys 1201W/1301W/1401V/1501V |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Phys 1201W/1301W/1401V/1501V |
Grading Basis: | A-F only |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Phys 1202W/1302W/1402V/1502V |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Phys 1202W/1302W/1402V/1502V |
Grading Basis: | A-F only |
Typically offered: | Every Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 3.0 [max 3.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Course Equivalencies: | ME 3321/ME 3331 |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 2243/Math 2373/Math 2574H |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Math 2243/Math 2373/Math 2574H |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 1.0 [max 1.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 1.0 [max 1.0] |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Course Equivalencies: | ME 3321/ME 3331 |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 3.0 [max 3.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Periodic Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Periodic Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Spring Odd Year |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Periodic Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Spring Odd Year |
Credits: | 4.0 [max 4.0] |
Typically offered: | Periodic Summer |
Credits: | 4.0 [max 4.0] |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Periodic Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Spring Odd Year |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Fall Odd Year |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Periodic Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall & Spring |
Credits: | 2.0 [max 2.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 2.0 [max 2.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Biol 1009/Biol 1009H |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Course Equivalencies: | Biol 1001/Biol 1001H/Biol 1003 |
Typically offered: | Every Fall & Spring |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F only |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall, Spring & Summer |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall |
Credits: | 4.0 [max 4.0] |
Grading Basis: | A-F or Aud |
Typically offered: | Every Fall & Spring |